PREFORM MOLD (48-CAVITY)
Make Enquiry Now[jcolumns][jbox] [contact-form-7 id=”1818″ title=”Contact form 1″][/jbox][jcol/]
48 Cavities Preform Mold Description:
48 cavity preform mold for the preform with PCO 1810 neck, It has has real balanced hot runner system with valve gate. Equipped with cam roller design. The PET preform mold is designed with Husky’s injection molding system. The weight of the preforms is 22g, Cycle time is 26 Sec with general PET screw type of injection molding machine. It could reach 13 Sec with 3 stage post cooling system.The main components of molds ( die core, die cavity and screw neck) are made by injection process, which are made of special mold steel ( Germany steel 2316) after preheating treatment in the original factory in Germany. In this way, the mold with long life service and high quality can be used for 3 million shots without any maintenance, meanwhile, the wall thickness between max. Parts and min. Part is not more than 0.05mm. We adopt 48 cavities preform mold base of 50# steel and sliding block of 718# steel. And the molds equipped with imported components including high-qualitied lubricating copper plate, Germany heaters HOTSET, Germany standard PID temperature controller. Moreover, turning center processes make sure that every parts can match well; Proper distribution of cooling water way improve productivity effect and molding cycle only takes 15 seconds( need proper water chiller, bottle design and injection machine)
48 cavities preform mold, designed and developed by our engineers, is of high precision and long life span without traditional problems. In a word, Preform wall thickness is on error of 0.05mm; Weight difference is less than 0.3g; 2-5 molds per minute; 3 million guarantee; Utmost 72 cavities in one mold.
48 Cavities Preform Mold Features:
1. There are 48 cavities on the mold.
2. Electric control system with simulating stretch testing improve yield rate.
3. Adopt world advanced dipole taper localization technique, each cavity self-clamp independently, ensure mold concentricity.
4. The material of mold die core and die cavity are made of Sweden special mold steel.
5. International standard screw neck, imported nitrided steel with high hardness is of long usage.
6. Advanced hot runner design and even heating temperature make sure the high quality of plastic products.
7. Valve gated type without tail reduces labor force.
8. At least 3 million guarantee.[/jcolumns]